TH-PM5020 – Dual-Channel Benchtop Optical Power and Energy Meter Console
TH-PM5020 – Dual-Channel Benchtop Optical Power and Energy Meter Console
Product Drawing
- Single- and Dual-Channel Measurements
- All Functions Accessible by Both Touchscreen and Physical Controls
- Remote Operation and Network Capabilities Via USB, Ethernet, or RS232
- 8 GB Internal Memory
- Single- and Dual-Channel Measurements
- All Functions Accessible by Both Touchscreen and Physical Controls
- Remote Operation and Network Capabilities Via USB, Ethernet, or RS232
- 8 GB Internal Memory
The PM5020 Dual-Channel Optical Power and Energy Meter Console interfaces with one or two connected sensors to measure continuous wavelength and modulated light sources. This console is compatible with over 35 power, position, and energy sensors. When used with these sensors, the console will automatically detect and read the sensor calibration information stored in the sensor connector and combine this data with a user-set measurement wavelength to provide calibrated power or energy measurements. The console can also be used with third-party or custom sensors that meet the compatibility requirements outlined on the Specs tab.
Â
| Item # | PM5020 | ||
|---|---|---|---|
| Detector Compatibility | Photodiode Power Sensors | Thermal Power Sensors Thermal Position & Power Sensors |
Pyroelectric Energy Sensors |
| Measurement Ranges | 21 Ranges: 2 nA to 10 mA Ranges Selectable in W or A, Sensor Dependent |
9 Ranges: 2 mV to 1 V Ranges Selectable in W or V, Sensor Dependent |
12 Ranges: 20 mV – 100 V Ranges Selectable in J or V, Sensor Dependent |
| Wavelength Ranges | 200 nm – 1800 nm (Sensor Dependent) | 190 nm – 25 μm (Sensor Dependent) | 185 nm – 25 μm (Sensor Dependent) |
| Power / Energy Ranges | 100 pW – 20 W (Sensor Dependent) | 100 μW – 200 W (Sensor Dependent) | 10 μJ – 15 J (Sensor Dependent) |
| Bandwidth | DC – 250 kHz, Dependent on Sensor and Settings | DC – 1 kHz, Dependent on Sensor and Settings | N/A |
| Max Repetition Rate | N/A | N/A | 80 kHz |
| Wavelength Correction | Sensor Dependent; nm (A/W) | Sensor Dependent; nm (V/W) | Sensor Dependent; nm (V/J) |
| Units | W, dBm, W/cm2, lx, A | W, dBm, W/cm2, V | J, J/cm2, W, W/cm2 |
| Accuracy | ±0.2% of Full Scale (1 µA – 10 mA Ranges) ±0.5% of Full Scale (2 nA – 400 nA Ranges) |
±0.5% of Full Scale | ±0.5% of Full Scale |
| Display Resolution | 0.1 pA / Responsivity Value (A/W) | 0.1 µV / Responsivity Value (V/W) | 1 µV / Responsivity Value (V/J) |
| Item # | THPM5020 |
|---|---|
| Compatible Sensors | Photodiode Power, Thermal Power, Thermal Position and Power, and Pyroelectric Energy |
| Number of Channels | 2 |
| Optical Power Range | 100 pW to 200Â W |
| Optical Energy Range | 10 µJ to 15 J |
| Available Sensor Wavelength Range | 185 nm – 25 μm |
| Display Refresh Rate | 25 Hz |
| Bandwidth | DC – 250 kHz |
| Photodiode Sensor Measurement Range | 2Â nA – 10Â mA |
| Thermopile Sensor Measurement Range | 2Â mV – 1Â V |
| Pyroelectric Sensor Measurement Range | 20Â mV – 100Â V |
