(4) 100B-TX TO(1) 100B-FX MM 1300nm ST C1, D2
Specifications:
| Fiber Optic Connector Specs | |
| Multimode | Min TX PWR: -19.0 dBm Max TX PWR: -14.0 dBm RX Sensitivity: -30.0 dBm Max In PWR: -14.0 dBm Link Budget: 11.00 dB |
| Fiber Optic Connector Specs | |
| Multimode | Min TX PWR: -19.0 dBm Max TX PWR: -14.0 dBm RX Sensitivity: -30.0 dBm Max In PWR: -14.0 dBm Link Budget: 11.00 dB |
| Standards | IEEE Std. 802.3, 802.3u, 802.3x |
| Status LEDs |
PWR (Power):ON = Unit has power connected PWR 1 (Power):ON = primary power connected PWR 2 (Power):ON = backup power connected Fault:ON = Power failure or port link failure LNK/ACT (fiber):ON = Link; Flashing = data transmitting FDX/COL (fiber):ON = Full duplex mode; Flashing = collisions occurring RJ-45 (Ports 1 4): ON orange = Full duplex mode; Flashing orange = collisions occurring; ON green = UTP link; Flashing green = data transmitting |
| Dip Switches | 1:Full Duplex Fiber / Half Duplex Fiber |
| Data Transfer Rate |
10BASE-T:14,880 pps 100BASE-TX:148,800 pps |
| MAC Addresses | 1K |
| Data Memory Buffer | 512 Kb |
| Backplane | 1.0 Gbps |
| Dimensions |
Width:1.2″ [30 mm] Depth:3.7″ [195 mm] Height:5.5″ [140 mm] |
| Ingress Protection | IP 30 |
| Input Power | 12 to 48 VDC, 0.2A-0.7A, redundant inputs with reverse polarity protection; Additional barrel connector |
| Power Consumption | 3.3 Watts |
| Environment | -40 to +75°C Ext. operating temp. 5 95% humidity non-condensing 0 10,000 ft. altitude -40 to +85°C storage temp. |
| Shipping Weight | 2 lbs. [0.90 kg] |
| Safety Compliance | UL 60950; UL508; CSA C22.2 no 60950 SISTF1013-241-LRT & SISTF1014-241-LRT: UL Class 1 Div 2 for hazardous environments |
| EMI Compliance | CISPR/EN55022; EN60950 Class A; FCC Class A; CE Mark; EN61000-4-2; EN61000-4-3; EN61000-4-4; EN61000-4-5; EN61000-4-6 |
| Environmental Compliance | IEC60068-2-32 (Free fall) IEC60068-2-27 (Shock) IEC60068-2-6 (Vibration) |
Product Sheet:
- Spec Sheet
