(4) 10/100 Indust POE Switch 100Base MM, SC 2KM
4x T1/E1 + 10/100 Ethernet to Fiber Transport Mux Point System(tm) Slide-In-Module Media Converters 1310nm TX / 1550nm RX single fiber single-mode (SC) [40 km/24.9 miles] to Ports 2-5: (RJ48) [1.5 km/.9 miles] Port 6: 10/100BASE-TX (RJ45) [100 m/328 ft .] Port 7: 6-pin DIN [3 m/10 ft.]
| Device Technology | 100BASET |
|---|---|
| Type of Device | STANDALONE SWITCH |
| No Exp Modules/Slots | 0 |
| Number of Ports | 1-4 |
| UNSPSC Code | 43222612 |
Â
Specifications:
Â
| Standards | IEEE 802.3, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x |
| Data Rate |
Copper:10/100Mbps Fiber:100Mbps |
| Filtering Addresses | 1K MAC Addresses |
| Back Plane | 1.0Gbps |
| Status LEDs |
PWR 1 (Power):ON = primary power connected PWR 2 (Power):ON = backup power connected FAULT:ON = power input failure on PWR1 or PWR2 PWR FWD (ports 1-4):ON = PoE power output LNK/ACT (ports 1-5):ON = Link; FLASHING = data transmitting FDX/COL (ports 1-4):ON = Full duplex mode;FLASHING = collisions occuring |
| Dimensions |
Width:1.2″ [30 mm] Depth:3.7″ [95 mm] Height:5.5″ [140 mm] |
| Ingress Protection | IP30 |
| Input Power | 48 VDC; redundant inputs |
| Power Consumption | 4.6 Watts (without PoE); 66 Watts (Full load with PoE) |
| Environment Compliance | -40 to +65°C Ext. operating temp. 5% 95% humidity non-condensing 0 10,000 ft. altitude -40 to +85°C storage temp. |
| Shipping Weight | 1.4 lbs. [0.64 kg] |
| Safety | UL, cUL, CE/EN60950-1 |
| EMI | CISPR22/EN55022; EN60950 Class A; FCC Class A; CE Mark;CE EN61000-4-2; CE EN61000-4-3; CE EN-61000-4-4; CE EN61000-4-5; CE EN61000-4-6; CE EN61000-4-8; CE EN61000-4-11; CE EN61000-4-12; CE EN61000-6-2; CE EN61000-6-4 |
| Environmental | IEC60068-2-32 (Free fall); IEC60068-2-27 (Shock); IEC60068-2-6 (Vibration) |
Product Sheet:
- Spec Sheet
