EXFO Pocket Pal Visual Fault Locator – 635nm Laser with Universal 2.5mm Sleeve
The convenient FLS-240 locates faults visually by creating a bright red glow at the exact location of the fault on singlemode or multimode fibers. It has a reach of up to 5 km. Due to its small size, lightweight and simple but proven design, the Pocket Pal can accompany you anywhere. In your pocket or belt pouch, carry your FLS-240 to the most demanding environments. To ensure ruggedness, it features rubber seals, a fully enclosed laser head and a long-lasting On/Off switch. It has been tested to provide reliable operation under intensive use and harsh conditions.
Features:
- 635 nm red laser with universal 2.5 mm sleeve (CW and pulsed operation)
- 50 hours of operation (typical)
- Standard AAA alkaline batteries
- Rugged and weatherproof
The EXFO Pocket Pal Visual Fault Locator is a robust, cost-effective OTDR dead-zone tool. This VFL identifies fibers from end to end and locates polished connector endfaces easily. It features a universal connector that accommodates 2.5mm ferrules for SC, ST, FC connectors.
The EXFO Visual Fault Locator includes two AAA alkaline batteries, soft pouch and wrist strap, user guide and Certificate of Compliance.
Pocket Pals are the truly affordable way to locate faults in OTDR dead zones. They identify fibers from end to end and locate polished connector endfaces easily. A red laser shines through most yellow-jacketed fibers to help you pinpoint breaks, bends, faulty connectors, splices and other causes of signal loss.
These handy locators have up to 5-km distance range and a 635-nm wavelength with excellent visibility and the highest attenuation. Pocket Pals have the best short-range visibility/price ratio.They locate faults visually by creating a bright red glow at the exact location of the fault on singlemode or multimode fibers.
Due to their small size, light weight and simple but proven design, robust Pocket Pals can accompany you anywhere even to the most demanding environments.
To ensure ruggedness, they have rubber seals, fully enclosed laser head and long-lasting on/off switch. Their extremely high efficiency guarantees prolonged battery operation for 50 hours uninterrupted.
The FLS-241 features a universal connector that accommodates 2.5-mm ferrules. Each tool is 6.875″ x 1″ and weighs 4.23 ounces with batteries. Includes two AAA alkaline batteries, carabiner belt clip and user Guide.
The Pocket Pal is the easiest way to identify fibers from end to end and locate polished connector endfaces. Its red laser shines through most yellow-jacketed fibers to help you pinpoint breaks, bends, faulty connectors, splices and other causes of signal loss.
It has a reach of up to 5 km(Typical length of continuous fiber at which end-to-end identification is possible. Visual fault location depends on ambient light conditions at test site.).Â
The convenient FLS-240 locates faults visually by creating a bright red glow at the exact location of the fault on singlemode or multimode fibers.
Due to its small size, lightweight and simple but proven design, the Pocket Pal can accompany you anywhere. In your pocket or belt pouch, carry your FLS-240 to the most demanding environments. To ensure ruggedness, it features rubber seals, a fully enclosed laser head and a long-lasting On/Off switch. It has been tested to provide reliable operation under intensive use and harsh conditions.
SPECIFICATIONS(Specifications are valid at 23 °C ± 1 °C.)
Operation (Hz): 2 to 4
Wavelength (nm): 630 to 645
Emitter type: Laser
Power output b (typical) (mW): 0.8
Distance range c (typical) (km): 5
Operation mode: Pulsed and CW
GENERAL SPECIFICATIONS
Power supply: 2 AAA alkaline batteries
Laser class: 2M
Battery life: (h)(Typical battery life using AAA alkaline batteries. Battery life may fluctuate significantly, depending on specific unit’s laser current.)
CW: 35
pulsed:Â 50
Length: 17.5 cm (6 7/8 in)
Maximum diameter: 2.5 cm (1 in)
Weight: without batteries 80 g(4.8 oz); with batteries 120 g (6.3 oz)
Temperature: operating —10 °C to 50 °C(14 °F to 122 °F); storage —30 °C to 60 °C(22 °F to 140 °F)
STANDARD ACCESSORIES
User guide, two AAA alkaline batteries, belt clip and Certificate of Compliance.
ORDERING INFORMATION
FLS-241-UNIV: Universal 2.5 mm ferrule (CW and pulse)
LASER SAFETY
Complies with 21 CFR 1040.10 except for deviations pursuant to Laser Notice No.50 dated 2007.
Download Product Spec Sheet:
- EXFO Pocket Pal Visual Fault Locator Spec Sheet (PDF)
- Instruction Manual
Â
Â
Â