Singlemode/Multimode Talk Set W/SC/FC Interchangeable
This is an intelligent and efficient instrument that combines in one set, the functions of both a digital optical phone and a stabilized light source.
It is widely used in operation of installation, optical testing, maintenance and fiber attenuation testing and ideally used in data networks, CATV and Telecommunication network.
It can carry out full-duplex communication with a high quality connection and not be affected by distance. With a comfortable hand held design, the user can operate this optical phone and tester with ease.
Kit Contents:
- (2x) Tak Set Units
- (2x) Headphones with Microphone
Features:
- Full-duplex digital communication with high quality conversion connection and low background noise
- Combines functions of both a digital optical phone call and a stabilized light source
- Large LCD display with backlight
- Low battery power indication
- Laser source has modulation of 270Hz | 330Hz | 1KHz | 2KHz
SPECIFICATIONS:
Wavelength (nm): 1310 (A) / 1550 (B)
Fiber type: SM & MM
Dynamic Range: 45dB
Laser Device type: FP – LD
Output adjustment (dB): 1
Output power (dBm): -5 ~ -15
Output stability (dB, 30min, 20°C): < 0.05
Modulation: CW, 270Hz, 330Hz, 1KHz, 2KHz
Connector type: FC & SC (PC)
Battery: 3*AA, 1.5V
Battery operation time (h): 30 (Talk set function) 50 (laser source function)
Work temperature: -10 ~ +60
Storage temperature: -25 ~ +70
Dimension (mm): 161 × 90 × 44
Weight (g): 225
Standard configuration:
1. Optical Talk Set 1 Pair
2. User manual 2 pcs
3. 1.5V AA battery 6 pcs
4. Cleaning Cotton swab 1 bag
5. Carry Bag 2 pcs
General Maintenance
- Always keep the connector ports of your talk set clean.
- Do not use bad quality optical fiber connectors/adaptors; otherwise, it could damage the interface of detector that will greatly affect the performance of the unit.
- Try to use only the adaptor(s) supplied.
- Once not in use, make sure dust-proof cap is placed properly over the optical ports.
- Carefully plug in/out for fiber connectors/adapters to avoid scratches on the port of the power meter.
- Keep regular cleanings on optical port of Talk Set, please clean with cotton swabs supplied using alcohol properly. Always follow alcohol cleaning with a dry cleaning.
- NEVER USE APC CONNECTORS ON THIS UNIT
Quality Assurance
We do not approve users to repair this instrument by themselves.
1. The instrument will be warranted for 12 months from the date of delivery.
 We provide a warranty for a period of 12 months for all products from the date of delivery. During warranty period, if there are any problems with the product, we will repair or replace a new one. But in any case, the cost of repair will not exceed the purchasing price of the product.
2. If a breakdown occurs when using the equipment, please do not open the outer cover. Please immediately contact our sales department or the respective agents for possible solutions.
3. If the fault is caused by production limitation, we will replace a new equipment or service at no cost.
This warranty only applies for the normal use, excluding:
1. Repair the unit or changing the unit without the necessary authorization.
2. Improper usage, neglect, accident, causes external to the product or other factors beyond the control of us.
Download Product Spec Sheet:
- Full Duplex Fiber Optic Talk Set Product Spec Sheet (PDF)
- User Manual
Â
